FOCAL SOLO6 ST6 RED - Aktivni studijski monitor - cijena za komad!

Audio professions in need of a professional nearfield studio monitor should check out the Focal Solo6, a single active 2-way nearfield studio monitor speaker, ideal for use in small professional studios. The MDF cabinet houses a 6.5" W-composite sandwich woofer and a 1" Beryllium inverted dome tweeter to provide full and neutral sound with a wide frequency response. An optimized tweeter baffle provides remarkable dispersion control, while the front laminar bass port helps to extend bass response while removing port noise and distortion.
Each driver is powered by its own amplifier for a total of 130W of RMS power for a strong, distortion-free performance. The rear panel offers a standard XLR input connector, which allows you to connect virtually any professional sound system. It also has a high-pass filter, shelving EQs for low and high frequencies, and a mid-frequency EQ to help you dial in your best sound. The focus mode provides two monitor signatures in one; 2-way monitor and 1-way full-range monitor from the woofer alone. The monitor is magnetically shielded for safe use near video monitors and other electronic equipment.

Beryllium inverted dome tweeter: very low directionality, excellent linearity, and dynamics
Optimized baffle tweeter: excellent dispersion control
Composite sandwich W-cone: sound neutrality, no distortion
Focus mode: two monitors in one; 2-way monitor and 1-way full-range monitor (woofer alone)
Large laminar port: no port noises or distortion
Inserts for wall fastening
Automatic stand-by mode for power saving
Settings: LF shelving, HF shelving, LPF at 160 Hz

Focal FOPRO-SOLO6ST6 Specs
Studio Monitor
Monitor Type Active 2-Way
Enclosure Bass-Reflex, Shielded
Power Rating 130 W RMS
Drivers HF Driver: 1 x 1.5" / 3.8 cm Beryllium Inverted Dome Tweeter
LF Driver: 1 x 6.5" / 16.5 cm Composite Woofer
Amplification 1 x HF Amplifier: Rated at 50 W RMS
1 x LF Amplifier: Rated at 80 W RMS
Performance
Frequency Response 45 Hz to 40 kHz ± 3 dB
Maximum Sound Pressure Level (SPL) 110 dB
Signal Processing
EQ 1 x HF Shelf: -3 to +3 dB at 5 kHz (Continuously Variable dB Increments)
1 x LF Shelf: -3 to +3 dB at 150 Hz (Continuously Variable dB Increments)
1 x Mid Notch/Peak: -3 to +3 dB at 160 Hz
Filters 1 x High-Pass at 45 to 90 Hz
Parametric EQ None
Connectivity
Audio I/O 1 x XLR Balanced Female Analog Input (10 Kilohms)
Power
AC Input Power 100 to 240 VAC, 50/60 Hz
General
Enclosure Material MDF
Dimensions (W x H x D) 9.7 x 13.1 x 11.6" / 24.6 x 33.4 x 29.5 cm
Weight 28.6 lb / 13.0 kg
Packaging Info
Package Weight 32 lb
Box Dimensions (LxWxH) 18.75 x 15.63 x 14"