Pocket rockit V2 - pojačalo za slušalice

Amp on/off
Amp button turns unit on and toggles between two pre-amp settings. Amp-1 is setup to work best with single coil pickups and is indicated with green LED. Amp-2 is optimized for double coil pickups and is indicated with red LED. The unit can be turned off by holding down the Amp button for 3 seconds.

LED
Three colored LED light indicates that the unit is on and operating. LED changes color from red, green and yellow depending on what effect or function is engaged.

Delay:
Button allows user to select Double, Chorusing, Flange or no delay effect.

Reverb:
Button allows user to select Slapback, Club-Reverb, Hall-Reverb or no reverb effect.

Clean:
Button selects between three (3) distinct clean tube amp tones. Each tone has a natural, not overly compressed sound, rich in harmonic content and dynamic range.

Dirty:
Button selects between three (3) distinct tube style distortion tones. Position one has a Fender-like crunch. Position two has the Marshall overdrive sound, and position three is a highly compressed heavy metal overdrive tone. Each tone is natural, with rich harmonic content and wide dynamic range.

Level:
This is a two-position button that controls the intensity of the delay effects. You can select a Hi or Low intensity level. This button is only active when a Delay or Reverb effect has been engaged.

Tuner:
Button scrolls through six guitar strings starting with low E. Each string selected emits a tuning tone that can be used to tune appropriate string. While tuning, LED light will indicate red if string is too flat and green if string is too sharp. When string is in tune LED will turn yellow.

Click:
Button engages click track. Button scrolls between off position and hi and low volume.

Tempo:
Button scrolls through eight different click tempo drum beats between 60 and 180 bpm.

Filter:
Continuously variable EQ control that adjusts high and mid-range frequencies of the particular amp emulation model selected.

Volume:
Master volume control slider controls the overall volume level of line out / headphone out signal.

line out:
Provides a stereo line level signal for headphones or various recording and pre-amp applications.

line in:
Accepts stereo line level input from MP3 player or any other external source. Allows you to play along and simultaneously monitor both sounds. Volume control on the V2 does not affect the volume level of the external source.

Input plug:
Rotating input plug has 90 degree range of motion, with preset stops at 0, 30, 60 and 90 degrees. Enables unit to plug into any guitar jack.

Headphones:
Acoustically matched light weight stereo headphones with 1.0oz magnets and super bass 40mm diameter drivers.

Cable Kit:
1/8" to 1/8" stereo mini plug cable 6' long, a 1/8" stereo headphone splitter, a 1/8" to 1/4" stereo adapter plug and a mono 1/4" to 1/4" female adapter tube.