SONANCE SONAMP 1230

PROFESIONALNO 12 KANALNO POJAČALO SNAGE

Comparison Specifications

Output power: 30W x 12 channels @ 8 ohms / 45W x 12 channels @ 4 ohms / 60W x 6 channels @ 8 ohms, bridged
Dynamic output power: 49W x 12 channels @ 8ohms / 78W x 12 channels @ 4ohms / 158W x 6 channels @ 8ohms, bridged
Input impedance: 20k ohms
Inputs: 3 bus line-in jacks (left, right, auxiliary) / 12 direct-input-source jacks (gold plated)
Outputs: 3 line-out jacks (left, right, auxiliary)
Speaker terminals: 12 isolated 5-way binding post terminals (gold plated)
Level adjustment: 12 input level controls
Auto On/Off: Auto On sensitivity control
Additional Specifications

Face plate designed for in-rack installation
6 bridging switches
12 source-selection switches
Trigger select switch
Control voltage input
Control voltage output
Ground lift
Manufacturer Specifications

Dynamic headroom: +2.13dB, 12 channels @ 8ohms / +2.38dB, 12 channels @ 4ohms / +4.15dB, 6 channels @ 8ohms bridged
Total harmonic distortion: 0.1% 20Hz - 20kHz @ 8ohms (30 WRMS) / 0.25% 20Hz - 20kHz @ 4ohms (45 WRMS) / THD @ 1kHz less than 0.01% with 8homs (30 WRMS) / THD @ 1kHz less than 0.01% with 4ohms, 45 WRMS
I.M. Distortion (SMPTE 4:1): 0.01% @ 30W
Signal to noise ratio: -100dB below rated output (A-weighted)
Input sensitivity: 700 millivolt for 30W RMS @ 8ohms
Power consumption: 1400W maximum @ 4ohms (full power) / 6.5W (standby)
AC Fuse: 10A AG (F10AL- 250)
Heat output: 2732 BTU/hr (full power)

Weight: 17kg