FLIPPER ZERO - Multi-tool Device

Prodajem Flipper zero, pentesting gadget. Mogućnost čitanja Sub-1 GHz frekvencija ( garaže, razno razni senzori itd.) do 50 metara, RFID i NFC čitač, infracrveno ( tv, klime itd.), iButton itd.

U cijenu uključena i SD kartica, uređaj izvađen iz kutije i svega par puta testiran, novo.

Tehnička specifikacija:

MCU
Model: STM32WB55RG
ARM Cortex-M4 32-bit 64 MHz (application processor)
ARM Cortex-M0+ 32 MHz (network processor)
Flash: 1024 KB
SRAM: 256 KB

Display
LCD Monochrome
Resolution: 128x64 px
Controller: ST7565R
Interface: SPI
Diagonal Size: 1.4“

Baterija
LiPo 2000 mA⋅h
Trajanje - oko 7 dana

Sub-1 GHz module
Chip: TI CC1101
TX Power: 0 dBm max

NFC
Frequency: 13.56 MHz
Podržane kartice:
ISO-14443A/B
NXP Mifare® Classic®, Ultralight®, DESFire® etc.
FeliCa™
NFC Forum protocols

RFID 125 kHz
Frequency: 125 kHz
Modulation: AM, PSK, FSK
Podržane kartice:
EM400x, EM410x, EM420x
HIDProx, Indala

GPIO

3.3 CMOS Level
Input 5V tolerant
Up to 20 mA per digital pin

Bluetooth LE 5.0
TX Power: 0 dBm max
RX Sensitivity: -96 dBm
Data rate: 2 Mbps

Micro SD
Up to 64GB MicroSDHC
Read/Write speed: up to 5 Mbit/s

Buzzer
Frequency: 100-2500 Hz
Sound Output: 87 dB
Type: Coin

Vibration Motor
Force value: 30 N
Speed: 13500 rpm

Infrared
TX/RX range: 800-950 nm
TX power: 300 mW

iButton 1-Wire
Operate modes: Reader/Writer/Emulator
Supported protocols:
Dallas DS1990A
CYFRAL

Control
5-button joystick
Back button
Reboot — Back+Left buttons for 2 seconds

USB
1x USB 2.0 port, type C
USB device
Charging

Physical
Size: 100 x 40 x 25 mm
Weight: 102 grams
Body materials: PC, ABS, PMMA
Operating temperature: 0 ~ 40 °C