Ovaj oglas je prodan.
Pronjuškaj slične oglase.
EMERSON COMMANDER SK SKA1200025 0.25kW
- Cijena
- 66,36 €
Šifra oglasa: 30087915
Osnovne informacije
- Lokacija
- Bjelovarsko-bilogorska, Bjelovar, Centar
- Stanje
- novo
Opis oglasa
EMERSON COMMANDER SK SKA1200025
Frekventni pretvarač frekventni regulator 0.25kW, Uin 1x230V, 4.3A, Uout 3x0-240V, 1.7A
Control Techniques Commander SK Series AC Inverter for 0.25kW (0.33HP) 230V 3 Ph motor in VxF or Sensorless Vector control to 1.7A. Converts fixed frequency single phase 230V input to variable frequency three phase 230V for a standard AC Induction motor.
From October 2017 the CT Commander SK series is no longer available. The manufacturer recommends that customers upgrade to the Unidrive M200. See linked products below for M200 of equivalent rating.
Size A: 75mm Wide x 145mm Deep x 154mm High. IP20
Weight: 0.95kg.
Overload: 150% x 60 seconds
Speed Control Range: 0-1500Hz
Braking: Minimum 68 Ohm, Maximum 900W external resistor (not supplied) - use the 'Which Resistor' button on this page.
1 Analogue Input, 1 Analogue/Digital Input, 4 Digital Inputs, 1 Analogue Output, 1 Digital Input/Output, 1 Relay Contact set, RJ45 port for Modbus.
Input Current: 4.3A
Input Voltage: 200-240V Single Phase ±10% at 50-60Hz ±5%
Mounting via 35mm DIN rail or 4 x holes at rear for M4 screws on 53mm x 140mm centres.
više informacija na :
https://inverterdrive.com/group/AC-Inverter-Drives-230V/SKA1200025/
Frekventni pretvarač frekventni regulator 0.25kW, Uin 1x230V, 4.3A, Uout 3x0-240V, 1.7A
Control Techniques Commander SK Series AC Inverter for 0.25kW (0.33HP) 230V 3 Ph motor in VxF or Sensorless Vector control to 1.7A. Converts fixed frequency single phase 230V input to variable frequency three phase 230V for a standard AC Induction motor.
From October 2017 the CT Commander SK series is no longer available. The manufacturer recommends that customers upgrade to the Unidrive M200. See linked products below for M200 of equivalent rating.
Size A: 75mm Wide x 145mm Deep x 154mm High. IP20
Weight: 0.95kg.
Overload: 150% x 60 seconds
Speed Control Range: 0-1500Hz
Braking: Minimum 68 Ohm, Maximum 900W external resistor (not supplied) - use the 'Which Resistor' button on this page.
1 Analogue Input, 1 Analogue/Digital Input, 4 Digital Inputs, 1 Analogue Output, 1 Digital Input/Output, 1 Relay Contact set, RJ45 port for Modbus.
Input Current: 4.3A
Input Voltage: 200-240V Single Phase ±10% at 50-60Hz ±5%
Mounting via 35mm DIN rail or 4 x holes at rear for M4 screws on 53mm x 140mm centres.
više informacija na :
https://inverterdrive.com/group/AC-Inverter-Drives-230V/SKA1200025/
- Oglas objavljen
- 02.01.2020. u 16:08
- Do isteka još
- oglas istekao
- Oglas prikazan
- 407 puta